Apple TVs can be a popular item among those who love smart TVs. However, Apple TVs are acknowledged to have audio issues that could make watching difficult.
Imagine sitting down for a relaxing time watching a much-anticipated film or your favourite TV show, only to discover the Apple TV sound is not working.
Fortunately, many the problems that arise from the absence of sound on Apple TVs is due to problems with setup and configuration.
Before you call an competent and paying huge sums of money for repairs that are simple Check out this list of possible solutions for Apple TV. Apple TV no sound issue.
We’d love to hear that this has helped you save money as well as time. Let’s look at the perfect way to repair your Apple TV that has no sound.
How do I fix Apple TV No Sound Issue
To resolve any Apple TV no sound issue Make sure you’ve selected the correct speaker system and modify Your audio Format setting to auto.
To accomplish this, on your remote, go to Settings > Menu for Audio and Video the Audio Format, then Change Format New Format > Change the format to stereo.
These are the steps that can benefit you solve the issue if you’re Apple TV has no sound:
- Make Sure Your Apple TV Is Not On Mute Mode
- Verify for the HDMI Cable
- Restart Your Apple TV
- Configure Your Apple TV Audio Mode to Auto
- Modify your Apple TV Audio Format to Stereo
- Modify the Apple TV’s Audio Output from PCM to
- Soft Reset Your Apple TV Box
- Hard Reset your Apple TV Box
- Contact Apple Support
Make Certain You’re Apple TV isn’t on Mode Mute Mode
Sometimes, people avoid the obvious solutions believing that there’s no way to make the issue so obvious.
The TV can be turned off or lowered to a minimal level, making the sound unlistenable.
Before you take any of these more complex procedures, make sure you are at the level you’re used to watching your TV shows and films on. Sometimes, it’s simple.
Make sure you check the HDMI Cable
Most of the time there’s a connection issue that will end in being the problem. Most of the time, the hardware connection to the HDMI port doesn’t end up completely transposing all desired signals, like an audio stream.
The problem with audio connections may be due to a problem in the HDMI cable and/or its link to the television. When replacing an HDMI wire, a good practice is to remove the cable from the TV and then insert it back into the TV.
If this isn’t sufficient to fix the problem, unplugging the HDMI cable from both ends and reverse connections to the HDMI port connections could be a solution.
In the event that it is not possible, then it may be a good idea just change the HDMI wire entirely. Make sure that the replacement is one that is brand new to avoid problems caused by old wiring.
Start Your Apple TV
If shutting off power and turning back on does not do the trick, neither is the HDMI troubleshooting tips The issue could be caused by the latest installing of an audio driver, or any other changes to the firmware which occurred in the previous update.
If the changes haven’t been able to fully take place and process, the perfect solution is to reset Apple TV. Apple TV itself.
It involves going to the menu system and then selecting”Restart” “Restart” feature. This will reset the TV, and it will also include refreshing all applications.
Make the Apple TV Audio Mode to Auto
The most common mistake people make is that their television is connected to an audio system in the home or soundbar. If those systems are turned on to their default settings, then the television may not play audio because the devices are off.
If that’s not an issue, then in certain instances, it may be because it is because the broadcasting of audio needs the use of a specific bit rate for broadcast audio.
The TV will detect what is perfect audio mode, if the user was to go to the Settings Video and Audio section and then change the audio Mode on “Auto” after confirming whether the speakers you’re looking for are properly selected for the audio.
Switch the Format of Your Apple TV Audio Format to Stereo
Also, it could be that your TV isn’t receiving sufficient signals for broadcasting the sound. In that scenario, go into the Settings menu, and then select the Audio & Video feature, and then set your Dolby Digital Out option in the setting to “Off.”
This will allow this signal to get more powerful. Certain firmware versions offer the opportunity of choosing the format type that ranges from Dolby Digital 5.1 to “Stereo.”
Switch Your Apple TV Audio Output to PCM
If, after switching the Apple TV audio format you’re having no audio, then you’ll need to have to change the settings for audio to PCM.
PCM is a shorthand for Pulse-Code Modulation, which is the standard format of digital audio used in computers.
Here’s how you can change how you change your Apple TV audio to PCM.
- Click the Settings buttonon on your remote to control your TV.
- Select your sound settings feature.
- Click Audioand proceed to the Audio Format.
- Select to use the PCM format.
Be aware that these steps could be different according to the TV model you have. However it should be simple to locate PCM as a PCM opportunity within your set after you go to the Audio Format settings.
Soft Reset Your Apple TV Box
If shutting off something and then turning it on isn’t your first try at resolving a technical issue, you’re not solving the problem correctly.
Most problems can be resolved by turning the device affected, and then turning it back on within a couple of seconds.
This extremely simple procedure can solve the vast majority of the common issues that occur with Apple TV. Apple TV, including any audio issues it may have.
To restore to reset your Apple TV, turn everything off, and then disconnect the Apple TV box from the wall outlet.
It should be at least 60 seconds before reconnecting it. If you find that your Apple TV still has no sound, you might need to perform a reset. Read on for step-by-step directions.
Hard Reset Your Apple TV Box
Be aware that the hard reset resets the settings of your Apple TV back to its initial settings, and erase all your data, including your account and settings.
Be sure to keep the Apple TV plugged in and maintain an internet connection up to the time that the reset procedure is finished.
1. Select the Menu using the remote of your Apple TV remote.
2. Enter to the Setting application.
3. Click to scroll down Systems.
4. Then, click Reset under the Maintenance section.
5. After that, choose Reset and Update..
6. Next, click Reset and then Update for a reset of the settings on your Apple TV.
This will restore to your Apple TV to its factory settings, as well as make it up-to-date to the most recent TVOS version.
After the reset process is completed, be sure to change the audio format to Stereo.
Contact Apple Support Apple Support
If at this point , you are still not able to hear any sound on your Apple TV even after you’ve efforts each of the suggestions above then it’s the right time to call Apple Support.
There may be other methods or methods to use to resolve and diagnose the audio issue. If they’re not able to fix the issue then you might want to hire a reputable TV technician.
Many online retailers offer an assistance team that will visit your home and assist in the repair of your television.
It is possible to inform them about all the actions you’ve already efforts in order to maximize their visit to their services and reduce the amount of time spent by everyone.
Final Thoughts regarding this issue Apple TV No Sound Issue
You can tell that repairing an Apple TV no sound issue isn’t a rocket science if you are aware of what to look for.
In most cases it is a simple power cycle that will fix the issue if the Apple TV sound is not working. Sometimes, you’ll require a thorough review of the suggestions above until you can find the solution that is working for you.
We hope the troubleshooting techniques provided in this article were helpful in helping you resolve audio issues in Apple TV. Apple TV.
Let us know if this has helped solve this issue. If you’ve had success using something else, please leave your feedback below!
