If you’re iPhone SE simply won’t charge, you can try to reboot the device. You can leave it in the charger for a few minutes or try different accessories to ensure they’re in perfect contacts with your charging port. Sometimes, you’ll require as much as performing the factory reset.
A iPhone that doesn’t charge is a common and difficult problem. I’ve experienced it on my personal iPhone and a colleague came to me with his because they were experiencing similar issues on the iPhone SE. Thankfully, with a little problems I solved I was able restart the charging of the phone with both the case. I’m sharing what I’ve learned.
If you’re worried that your iPhone SE won’t charge, this is where you should be. Let’s dive into it.
How Do I Repair an iPhone SE that isn’t charging?
Here are a few of various solutions you can test out in case you’re iPhone SE refuses to charge up.
It is important to know the two iPhone SE models. These suggestions will be applicable to both models, unless stated.
1. Restart the iPhone
Starting the iPhone SE differs slightly between the two generations.
- For the first generation iPhone SE: Press and hold the button at the top, located on the top of the model until the slider pops up. As instructed, pull it and then wait for your iPhone to shut off. After it has turned off, hold and press on the upper button till the Apple logo is displayed. If you can see an Apple logo, you’ve successfully restarted your device.
- For the second generation iPhone SE The user needs to hold and press the power button to the left, similar to the iPhones of recent generations. Removing the slider that is displayed then wait until the iPhone to shut off. After that turned off, hold and press your power button for a few seconds until you see you see the Apple logo shows up. Once the Apple logo is displayed that it has been successfully restarted, you’ve successfully restarted the device.
- For the 3rd Generation iPhone SE: Press and hold the volume button as well as your side button till the slider is up. After the phone has turned off, hold and press on the left side until you see the Apple logo appears.
2. The iPhone is not connected for an hour
If you are aware that the battery in your iPhone is completely dead, all you need to do is plug in an adapter that is compatible with your wall and Lightning cable and plug the phone on for up to one hour.
This gives it the time to gradually pour energy into the battery, until it is able to start charging normal. This is shown by the icon for the battery that appears at the top of the screen.
3. Try an alternative Lightning Cable
Due to the flexibility of the Lightning cable can be, the cables could be damaged quickly. The cables you get with your phone are likely to be of high-quality and may last for up to a year however, they will usually be thrown away at some time.
Try a different cable to ensure that the charging device isn’t the reason that your device isn’t charging.
4. Try a Different Charger for your iPhone
In some situations, especially when the electrical supply isn’t steady, the charger itself could have a component which has burned out.
You could utilize an alternative wall adapter to eliminate this possibility. You can also connect to your USB ports of your laptop if you don’t have a spare USB charger that is lying around.
5. Test Your Accessories on an Other iPhone
Another way to determine the condition of your charging devices is to try charging the person’s Apple iPhone using your equipment. In the event that it’s charging without problem then the issue is not caused by the accessory. Most likely, it’s caused by the hardware or software on the device.
6. Clean the Charging Port
Examine your Lightning port in Your iPhone SE and make sure that there isn’t any dirt or dust that has accumulated within. If it’s not, you can switch off the device and employ a toothbrush or toothpick to remove any dirt that may be inside.
Avoid using compressed air to charge this device because it could harm the microphones and speakers close to the port for charging.
Also, you can test your Lightning cable near the end to ensure that there isn’t any corrosion of its contacts.
7. Try a wireless charger
This only works on an older version of the iPhone SE as the first-generation phone is not compatible with wireless charging.
If you own one of the 2nd generation model there is an alternative method of troubleshooting the device. It’s to put it on an wireless charger. It’s possible that you don’t have one in your home, but you will locate wireless charging pads in the majority of modern vehicles and that’s an option to consider.
In addition it is not the only thing, there are numerous Android devices that have the reverse wireless charging. This allows you to make use of it as wireless charging pad.
8. Update iOS
If a problem with charging occurs following the release of an updated iOS update, Apple will likely push out an small iOS update as soon as they are able to. You can determine whether there are any new updates available by following the following:
- Go to Settings
- Select “General”
- Click on “Software Update”
- From here, you’ll find the “Install Now” button or an “Download to Install” button.
- Tap that button to begin updating the version you have installed of iOS.
9. Perform a DFU Restore
A restore of DFU is a last option before taking the iPhone for a visit to the Genius Bar located in the Apple Store.
This is a method that completely erases the phone’s data and make it appear like it was new out of the box. You can consider this as a more effective method to restore your iPhone instead of a normal factory reset.
Couple Of things you should be aware of:
- The procedure will erase all of your data, so you should make an archive of your data prior to starting the process.
- Avoid this method If you’re iPhone is jailbroken because it will cause the device to be bricked.
In the beginning, you’ll need switch the device to DFU mode.
- To switch the iPhone SE of the first generation iPhone SE into DFU mode:
- Connect it using the USB cable and connect it to your PC
- You can open iTunes or Finder dependent on the macOS version you’re using.
- Hold both the power and Home buttons. Hold both Home and power buttons.
- Release the top button and let go of the Home button.
- After a few minutes (be patient as it may take up to 10 seconds) After a few seconds, you will be informed on your computer that the device was recognized as being as being in the recovery state. Now, press your home key. The screen will remain black for a while.
- To turn the third and second generations of the iPhone SE into DFU mode (this is more complex, so pay close careful attention):
- Connect it using USB directly to the computer
- Open iTunes or Finder.
- Hit the volume button
- Hit the volume button immediately following
- Press this side-button until your display turns black.
- When it does this, while pressing it down, hold down the volume button too.
- Begin counting to 5, then press just the button on your side.
- Press the volume button till your device recognizes the iPhone that is in the recovery state. The screen will remain in black.
On your PC, you will be able perform an iPhone restore by clicking “Restore iPhone”. That’s it!
10. Bring it into the Apple Store
In the event that none of these options do the trick, the only solution is taking the iPhone into Apple Store Apple Store or a third-party repair service.
It is possible that you will need to have the logic board replaced or your battery changed.
Why I don’t see my iPhone SE 2020 charging?
Being aware of the causes for the possible causes of an iPhone SE that doesn’t charge can be helpful since it gives you an ideal method to fix and troubleshoot the problem.
Minor Software Problems
If you’re iPhone isn’t charging it could be because your application isn’t communicating with the iPhone SE charger or battery.
Although software problems can be very serious In the majority of cases these are minor issues which can be easily fixed.
Dead battery completely
There’s a distinction between a battery that has just expired and one that’s been left without charge for months. In the second case when you attempt to connect it to an outlet it’s likely that you’ll not receive a prompt response.
The reason is due to the constant loss of power inside batteries. There’s always some battery juice in a device that’s just gone out of service, even if the phone doesn’t work.
If you do not use the phone for more than a week, the battery drain will reduce it to a very low level. When you put the Lightning cable in the charger, it will discover that the iPhone will not charge.
Bad Charging Accessories
In certain instances your chargers may become damaged or damaged in some manner, which you don’t know about this.
It is essential to ensure the performance of the equipment that you are making use of. This is a crucial aspect to consider when diagnosing the problem.
Poor Charging Contact
The contacts made of metal on the other end of the Lightning cable are intended to be connected to contacts within the charging port on your iPhone. This allows the flow of electricity through the charge port to your phone.
When the contacts are damaged or the Lightning port is filthy or dirty, it hinders proper contact, and could result in an iPhone that isn’t charging.
Damaged Charging Port
A charging port that’s completely gone out of the window there are a couple of alternatives to bring the phone back in working in good working order. You could either send it to be repaired or go through the normal charging process with wireless chargers.
Major OS Bug
If you have recently upgraded your iOS to an upgraded version, the problem may be due to a serious bug in the latest Version of the OS.
Very serious hardware problems
If you suffer significant damages on the hardware of your device such as the logic board or the battery which is likely to be caused through the effects of water, it could be left with an iPhone which won’t charge.
How do you repair an iPhone that isn’t charging?
Absolutely! I was able to repair my Apple iPhone as well as my buddy’s iPhone SE without having to go to Apple.
It’s just a matter of patience and time to explore the possible solutions carefully and carefully, but it’s going to be successful for you.
Final Words
The Apple iPhone doesn’t need to be taken to the store once it ceases to charge. Do not give up before trying these solutions.
Allow it to be plugged in for one hour, and then try to restart it, upgrade iOS or utilize various charging devices. This is the best solutions that will help, however there are other solutions you could apply.
It is likely that the lightning bolt was visible at the time you got to the next section of the article. If this has helped you to get your iPhone charged then why not look through the other posts?
