How to Make GameCube Controller With Steam

Nintendo produced and introduced it’s GameCube controller back in 2001 to accompany it’s GameCube gaming console for home use. Although it is possible to purchase the authentic Nintendo controller for $1, handful of off-brand copies are to purchase at extremely low cost.

But, whether original or replica, a commonly asked concern is whether or not the GameCube controller is compatible in conjunction with the Steam client on the PC and how it could alter the game? To help users we decided to provide a step-by step guide to how to use the GameCube controller with Steam.

What are the benefits of using the GameCube Controller?

GameCube controller is well-known for its sleek design. The two-finger controls allow you to interact with games more efficiently and give you the ability to control audio or audio playing back. The controller comes with up to 30 hours battery power that is ideal for long games.

Additionally, the buttons for controllers are extremely enjoyable to use and provide greater accuracy when you try to aim or move through various menus, particularly when playing PC games.

How do I use the GameCube Controller on Steam?

If you wish to utilize the GameCube controller to play games on Steam then you must utilize a third-party driver, called SC controller. The entire process could be somewhat complex for some users however our step-by step instructions can make the entire process easy and fun at the same time.

Download and Install the Wii U USB GCN Adapter/vJoy Device Driver

1. 1. Purchase the Wii U USB GCN Adapter and connect both ends of the other USB ports to your computer.
   2. Get the most recent Version of the driver that works with this adapter. Wii U USB GCN adapter.
2. Then, run the Setup file , and select your installation place as well as Shortcut options.
3. After the installation is completed after the installation is complete, a pop-up window titled “Zadig” will open.
4. Select Optionand then Select List All Devices. Make sure you have the WUP-028 device is chosen by default from the drop-down menu. Also, ensure that the 057Eand 0337figures are chosen under the USB ID section.
5. Next, click “Replace Driver Then, click Reconfirm.
6. Then you’ll be able to get your vJoy Device Driver set-up screen after the Windows shuts down by itself.
7. Continue to click nextto download the driver.

Step 2: Installing x360ce

1. 1. Download both version that include 32-bit games as well as the 64-bit games.
   2. Then, unzip the downloaded files into two distinct easily identifiable folders, then install them in separate folders.

1. 1. 1. Install each version separately.
      2. A warning message appears when you install one version of these two.
      3. Select Createto create the file that is missing and close the warning page.
      4. A new window named Windows Device Detected pops up this means that the Windows vJoy Device is detected as a device by system, and it is waiting to be set up.
      5. Then, choose Search automatically option under the Optionsoption and click search the internet.
      6. Next > Click Next > Finish.
      7. “New Device Detected” “New devices identified” window may appear three or four times. Click next > Close each time it pops up.
      8. A window that displays 4 controllers will appear this indicates that x360ce is picking up the adapter.

Step #3: Enable GameCube Driver

1. 1. 1. In the x360ce window search for GCN in the search box.
      2. Click on Wii U USB GCN adapter on the right side of your screen.
      3. Click to start. Then, a message akin that of ‘ Port 1 4 , detected’ will appear.
      4. Return to the x360ce. With the controllers 1-4 connected and checked for response pressing down with the GameCube pad or analog sticks, you get an immediate response from the Xbox 360 controller buttons.

1. 1. 1. 1. Set the sensitivity of your analog stick to your preferences by altering your Dead Zone settings to 30 percent and the Anti-Dead zone setting to the setting of 80%.

Step #4: Uploading file extensions to your Steam Game folder

1. 1. 1. 1. You can go to the 32-bit and 64-bit folders of the x360ce.
         2. Take all three file and then paste them into Your Game on your Local Disk (C:) > Program Steam > Steamapps.

Summary

In this article, we will show you how you can utilize the GameCube controller in Steam We have provided the solution in four easy steps, starting with installing the Wii U USB Adapter to uploading your game files to the Steam game folder.