Another problem that is obvious but easy to forget.
AirPods use Bluetooth wireless technology. Bluetooth radios must be available on your device.
Open the Settings app for an iPhone or iPad, and tap “Bluetooth.” “
This will indicate that Bluetooth is enabled. Make sure the slider faces to the right.
Open System Preferences on your Mac and click “Bluetooth”. Next, click on the “Turn Bluetooth On” button.
Different devices might have different steps but you will usually find the option to enable or disable Bluetooth in your device’s settings.
After Bluetooth has been enabled, you will be able to search within the list for your AirPods.
Make sure your AirPods are always accessible.
Your AirPods should be able to automatically reconnect. If they don’t, locate the Bluetooth device in the list and click or touch the AirPods to connect.
For those AirPods that have not been connected, hold the button on the back of your charging box (or the noise control buttons if you have AirPods Max) for a few seconds. The status light will turn white.
When they are ready for pairing, the AirPods will flash white lights.
AirPods can be detected by your iPhone or iPad when they are in pairing mode. You will then be prompted to pair them with a simple tap. This is due to the magic of H1 Chips (or W1 chips for the first-generation AirPods span>).
To connect with other devices, search for the AirPods among the available Bluetooth devices and then select them to connect.
3. Your Devices Needs A Reset
If you still have problems connecting to your AirPods, it may be necessary to restart your device.
This is the best way for you to get iOS or iPadOS devices. These steps will help you get iOS and iPadOS devices.
- To go to sleep, simply press and hold the sleep/wake key.
- Release simultaneously the up/down volume buttons and press the sleep/wake key.
- Hold the button down until you see the Apple logo on the screen.
If you press the button too quickly, your device will turn off.
This is similar to starting a new computer.
Although you won’t lose your settings or data, this option is a good idea if something doesn’t work with your Apple smartphone.
To display the Apple logo on older iPhones and iPads, hold down both the home button and the sleep button simultaneously.
Then click “Restart …””.
Click on the Start button of a Windows computer, and then click on “Restart.”
Other devices may require different methods.
Connect the AirPods again after your device has been rebooted.
4. Your software is out-of-date
Are your firmware and operating systems up-to-date on your device?
AirPods comply with the minimum OS requirements:
iOS and iPadOS – 15.1
iOS and iPadOS 14.3
iOS and iPadOS: 13.2
iOS and iPadOS 12.2
iOS and iPadOS10
Your iPhone can’t be paired with third-generation AirPods until your iPhone runs iOS 14.
If your Apple device can’t update to the correct OS version, you won’t have the AirPods.
Upgrade or downgrade your device to older versions of AirPods.
Non-Apple devices do not have to be restricted by the OS. If you’re having trouble, make sure to update your system software.
Make sure you have the latest Bluetooth driver installed if Windows is your operating system.
Note: Your device must support Bluetooth 2.0 or higher.
Version 4 was released in 2010 so you are likely to be fine. It is important to note that updates won’t make any difference if you don’t have the right hardware.
Once you are sure that your device is updated, reconnect your AirPods to the computer.
You might forget them if they don’t connect. If they were paired before ).
Next, switch the earphones to pairing mode.
5. Your device is out of range
Bluetooth is a remarkable technology but has a limited range.
All AirPods models, except for the first-generation AirPods run on Apple’s H1 chips that use Bluetooth 5.0.
Bluetooth 5 was released in July 2016. Close the lid for ten seconds, then open it again.
It’s fast and easy!
Hold down the Noise Control and Digital Crown buttons for approximately ten seconds. The status light will blink amber.
When you feel the amber glow, turn off the buttons. The AirPods Max will reset to factory default settings if you leave them down for too long.
Connect your AirPods to your device again after the device has been rebooted.
Reset your device if your earphones still aren’t connecting.
Before you can try either reset, however, it is important to first remove (i.e. Unpair the earphones.
Open the Settings app for the iPhone or iPad, and tap “Bluetooth.” “
Tap on the blue icon and then click on “Forget This Device”.
This will remove AirPods on Apple devices that have the same Apple ID.
Click the Apple logo in the upper left corner of your Mac to open “System Preferences.” “
Click on Bluetooth.
Locate your AirPods in the list. Hover your mouse over it to reveal a white circle containing an X.
Click on the X and then click on “Remove.” “
Instructions may be different for other devices, so please make sure you check your documentation
This method is often the same as that used for Apple devices.
Open Bluetooth settings, locate the AirPods and click Remove or Forget.
Once you have taken out the device, it’s time to pair your AirPods.
This is a more soft reset than a factory restoration.
To set up pairing mode, follow the steps in step 2. Next, connect your AirPods to your device.
If the pairing fails it’s time to break out the hammer.
It’s not a literal Hammer, but a metaphorical one
Perform a factory reset on your AirPods.
You can reset your AirPods Max using the buttons below.
Hold both buttons down until an amber light appears. Then a white light flashes.
AirPods Pro and AirPods Pro can be placed inside the case. Next, hold down the setup button on the back of the case for approximately 15 seconds. The status light will turn from amber to white after it flashes.
Once the AirPods are back to factory settings, you will be able to connect them to your device again.
7 Is your AirPods connected to another device?
If you have trouble with one device, you might try connecting to another nearby device.
If the device is on, it is possible for your AirPods to be connected automatically to that device.
If this is the case and you are unsure of which device it may be, the best solution is to reset the AirPods.
This reset will delete all previous pairings with your AirPods.
You can manually unplug the AirPods from the computer or turn Bluetooth off.
Then, connect the AirPods to the device.
If your Apple device has been paired with your AirPods, and you login to iCloud the AirPods will establish pairing relationships.
The AirPods will automatically switch between your devices when you play music.
When your AirPods Pro connect to your iPhone and you play video on your MacBook with the Apple Video app using the Apple Video app (available in iOS 10.1), your Mac’s audio output will go through your AirPods Pro.
If you don’t like the automatic switch ,
8. Your AirPods are Dirty
If the case is dirty, your AirPods or AirPods Pro may not be able contact it.
If this happens your earphones won’t charge and you won’t be able pair them.
Use a soft, dry cloth to clean your AirPods.
For stubborn grime, you can use a little water.
Keep in mind that less is more and that gentler is always better.
9. AirPods Hardware Problem
It’s possible that your wireless earbuds have trouble connecting to other devices, even after being charged and reset.
Are they susceptible to being dropped on the floor or soiled by water?
Do the AirPod cases or AirPods seem to have sustained any damage?
Maybe you are the one who can answer.
Contact Apple, it doesn’t really matter what.
Apple chat support and phone support are better than going to an Apple Store which can be difficult depending on where you live.
If the callback queue is full, you can request an Apple callback.
No matter which route you choose, make sure to keep your serial number close at hand.
You can find the serial number on the AirPods Pro, AirPods Pro Pro cases and behind the left magnetic ears on the AirPods Max.
AirPods, small devices packed with complex and impressive technology, are
While they are reliable and can function as intended, there may be situations where the earphones stop working.
Despite being frustrating, these nine steps will help you to solve the problem and restore audio bliss.