Internet Cuts Out For A Few Seconds (Causes, Fixes)

When your internet connection drops for a moment, you’re either streaming Netflix or downloading large files.

This problem can be frustrating, but you are not the only one.

This issue is common for many users, and there are several possible causes.

Volume 0%

We’ll discuss these causes and what you can do to fix them in this article.

Internet is Down for a Few Seconds (Causes and Fixes).

It’s not usually a major problem to lose your internet connection. There are simple ways you can fix it.

1. Look for Simple Causes

Your internet may sometimes stop working for a few seconds. This is not due to serious issues, but because of simple problems that you can resolve.

It’s best to start with the simplest solutions first before you move on to more complex ones.

You can power cycle the router if you suspect that the problem is caused by minor router glitches.

After unplugging the router, wait 30 seconds and then turn it on again.

Interference is another culprit.

The strength of your signal depends on where it is located.

Furniture, walls, doors, and other objects can temporarily cut off internet signal strength.

You might move the router closer to your devices to minimize interference.

Broken or bent cables could also be the cause of the problem.

You should inspect your power and Ethernet cables carefully for bends and cuts, as they could cause pocket loss.

Replace the cables if you discover any problems.

2. Verify Your Devices

If you experience internet connectivity problems with all of your devices at once, it could be your internet plan or connection.

If you have this problem with only one device (e.g. your phone or computer), then it is likely that the problem is related to hardware or software.

To find the root cause, check for any problems in your computer’s operating system and loose wire connections.

Dust buildup can cause your computer’s chips and other hardware to overheat, causing sudden system resets.

You can deep clean your system by removing the covers and using compressed Air.

3. Make sure you check your internet plan

The internet plan you choose determines how much bandwidth and signal strength you receive.

There are three types of internet connections available: DSL, fiber, and cable.

Fiber optic is the best choice for those who need super-fast connections with high bandwidths.

It is however expensive, requires network infrastructure and isn’t widely available.

DSL (Digital Subscriber line) is one of most common connection types that most ISPs use.

It offers a reliable and fast internet connection, and is less expensive than other options.

Cable connections offer a better connection because they connect your modem directly to your devices using an ethernet cable.

It is also very fast with an average speed 100 megabytes per sec.

The type of internet connection that you have could be the reason for drops in your internet speed.

Talk to your internet provider to find out about your bandwidth.

4. Upgrade your Router

An outdated router can sometimes cause drops in internet connection.

Your router may not be compatible with the fastest internet service if it isn’t compatible.

This is because older routers use outdated wireless standards that cause lags and drops when connecting to the internet.

Your internet provider may have suggested upgrading your router if you have upgraded your internet service.

If you don’t have the time, you can do it yourself.

You can check your router for numbers like 11ac,11g or 11n which will tell you how old or young your router is.

Your router’s 11ac indicates that it is compatible with the most recent standards for high-speed internet plans.

A router with 11n may be a little older, but it is still acceptable.

Your router may be older than 11g. It is better to replace it.

Other numbers indicate that your router is old and cannot keep up with internet speeds.

5. Run A Speed Test

It is one thing to choose an internet plan, but it is quite another to get the speed you pay for.

You may not get the speed you need due to various factors.

A speed test can help you find out if your speed is in line with your plan.

There are many websites and apps that allow you to test your internet speed. These include and CloudFlare.

It doesn’t matter how you test your speed, it is a good idea for multiple times to check the overall performance of your connections.

It is very easy and takes less than one minute.

If these are not compatible, contact your service provider and ask them to locate the problem.

You may not get the speed you plan.

You may experience connection drops if you download and upload more than you have bandwidth.

It would be a good idea to have a faster internet connection in this instance.

6. Change to Ethernet

A WIFI connection means that your devices are connected via radio signals.

Different radio signals might not be able to transmit at the same speed due to different limitations.

An ethernet cable is a great option to ensure an uninterrupted and fast connection.

It’s similar to talking on a mobile phone vs a landline, where the latter is more reliable and less likely lose signals.

WIFI connections are heavily dependent on distance between router and device. The longer the distance, then the weaker the signal.

You’ll be more likely to experience internet drops this way.

An ethernet cable can provide a stable connection as data is less likely lose during transmission.

Furthermore, ethernet connections can be more secure than traditional ones because they don’t require a password.

Hacking or intercepting your connection requires access to the router, ethernet cable and other information. This is almost impossible.

7. Don’t Overload Your Internet

You must be within the bandwidth limits of each internet connection to enjoy a stable and fast connection.

Different devices can connect simultaneously to the internet, which reduces the speed and causes internet drops.

Make sure you unplug any devices you aren’t using.

Cloud-based apps shouldn’t be left running in the background. They constantly connect to the internet, and consume a lot of data.

You can use the WIFI Analyzer to identify which apps are data-intensive by using each one individually.

8. Contact Your Internet Service Provider

Sometimes, an unstable internet connection can have no effect on your plan or devices.

Technical issues may arise at the other end, namely from the ISP.

To make sure everything is fine, call their tech support team.

9. Updating Your Drivers

You may experience interruptions or other problems if the driver for your wireless adapter becomes corrupted or out of date.

You can either reinstall your drivers or update them.

First, determine the model of the adapter. Next, go to the manufacturer’s site and locate the most recent driver for the adapter.

Next, download it and install it.

Alternativly, you can update the driver via your Device Manager.

Type “Device Manager” into the box located next to the Windows icon in the screen’s lower-left corner.

Select “Network Adapters”, and then select the device whose driver to update.

Click on the ” Update Driver” button.

To search for the most recent driver update, select ” Search Automatically for Updated Driver Software”.

Windows will automatically update any available updates. You can also check your connection to see if there are any improvements.

You could also reinstall the WIFI drivers instead of updating them.

Go to the Device Manager, and select ” Network adapters”

Click on the arrow to select your WIFI adapter.

Right-click on the driver and choose ” Uninstall device”

You can now automatically locate the latest WIFI drivers by restarting your computer. Then, check if your problem has gone away.

10. Troubleshoot the Internet Connection

Sometimes, the Windows Troubleshooter can help you find the root cause of internet problems.

Windows 10 has a number of troubleshooting options that can automatically resolve any problem, even connection problems.

Enter settings in the search box, and then click on Update and Security.

Click on “Troubleshoot” at the bottom of the pane.

Select “Network Adapter”, then click “Troubleshoot.”.

Follow the prompts on the screen to finish the troubleshooting process.

Try restarting your computer to see if it solves the problem.

You can always try another solution if the problem does not go away.

11. Factory Reset the Router

A faulty router could be the cause of network problems.

You can repair the problem by returning the item to its factory settings.

There are however a few things you should know.

First, a reset differs from a restart.

Factory resets erase all data including passwords and network names.

A reboot, on the other hand, is as simple as turning off your router and restarting it.

If no other method of troubleshooting works, the factory reset should be considered as an option.

You can also do the router factory reset by yourself, but not the modem reset.

It’s best to have a professional help you return your modem back to factory settings. You could cause problems by changing the settings or causing malfunctions.

Reset buttons are usually located on the bottom of routers or at the back. Simply hold the button down for 10 seconds to reset them.

You can also try the 30-30-30 method if it fails.

It involves:

  1. For 30 seconds, hold the reset button.
  2. After unplugging your router, wait for 30 seconds.
  3. Reconnecting the router.
  4. For 30 seconds, hold the reset button down.

You can also factory reset your router via its web interface.

Enter the credentials to sign in as administrator to the router.

You can search for credentials online if you don’t already have them.

Follow the instructions on the screen by selecting the ” Set” option.

12. Firmware Update for Router

As with any electronic device, routers can also develop bugs that need to be addressed frequently.

To improve router performance and fix any system problems, they release firmware updates.

To update your device’s firmware, enter your IP address in the web browser. Next, enter your login credentials.

Under “Advanced,” Management,” or Administration, look for “Firmware”, “Update” or “Administration.”

Go to the manufacturer’s site, search for your router model number, and then download the most recent firmware version.

The file will usually be in format. You need to extract it, preferably to your desktop.

To upload the most recent version, go back to the update section and click either ” Browse”, or ” Choose File”.

Click on the button ” update” to select the unzipped router file.

During the process, do not interrupt it by turning off your router or unplugging the router.

After the update is completed, reboot the router.

Normaly, the system will reboot automatically. If it doesn’t, turn off the router and then turn it on again.

13. Speed of Link Change

The link speed refers to the fastest speed at which the router can communicate with devices connected to it.

Your ISP will determine your link speed in bits per second. However, it might not be sufficient to meet your bandwidth needs.

Download errors can occur, for example, and internet connections will be cut frequently.

You can adjust the link speed to change the download speed and make it compatible.

You can go to ” Panel” simply by entering it in the search box and pressing ” Enter”.

Click on “HTMODE_NETWORK and Internet ” to open the window.

Right-click the selected connection and click ” Properties.

Click on “Configure” to open it.

Click on ” Link Speed,” to see a drop-down menu titled ” Speed and duplex”, which will display a list with speeds.

Once you have chosen the speed that you prefer, close all tabs and then check your internet connection.

14. Verify The Router’s Log for Errors

You can view the log of your router to see information about your activity, blocked devices and any errors that occurred while you were connected to the internet.

You can see the router’s activity log to determine if your connection was rejected.

In the search bar of your internet web browser, type in your IP address.

The following methods can be used to find your IP address if you don’t have it:

In the search bar at the left-hand side of the screen, type “Command Prompt”.

Typing ” Ipconfig” into the command prompt will execute it. Click ” Enter” to save the.

Scroll down to find ” Default gateway” under Wireless LAN Adapter WiFI or Ethernet.

Your IP address is the number that you see before ” default Gateway”.

Copy and paste the IP address into your internet browser’s search box.

Enter your credentials to access the home page of the internet provider.

Click on ” Advanced”, locate ” Administration”, and click on ” logs.

Examine all logs for errors in IP addresses.

If you find errors, unplug all router ports and network cables, then plug them in to other ports.

Try closing all tabs to see if the problem has been solved.

15. Select a Different Security Type

Users have suggested that frequent internet drops could be caused by the encryption type.

Your router’s security level is determined by the encryption type you select.

Modern routers use WPA-PSK encryption which is the highest level.

You can fix connection drops by changing the encryption type.

This is because your system will need to re-authenticate after a while.

You can change the encryption type by going to router’s homepage, then heading to the ” network settings” section and clicking on it.

Locate ” Security” and ” Network Pages”.

Select ” WPA” and ” WPA 2.”.

Click on ” Save”, and ” Apply.

To reset your router, click on ” Reboot”. Then you can apply the new settings.

16. Flush DNS

Your operating system stores Domain Name System records (DNS) or IP addresses automatically.

These cache flows can over time cause connectivity problems.

By flushing DNS, you can fix your connection issue.

In the search box, type “Command Prompt” and then choose “yes” from the popup window.

In the prompt window, type ipconfig/flushdns and hit ” Enter.”

A message will appear confirming that the DNS has been successfully flushed.



Similar Articles



Please enter your comment!
Please enter your name here



Most Popular